Orion
FMB
Manual band saw machine to cut from 0° to 60° right and 45° left. (Manual/Gravitational for version +G). Head structure in special aluminium casting alloy. Dynamometric blade tensioning. Blade cleaning brush integrated in the head protection cover. Head handgrip with integrated
Features
- * Manual band saw machine to cut from 0° to 60° right and 45° left (Manual/Gravitational for version +G)
- * Head structure in special aluminium casting alloy
- * Dynamometric blade tensioning
- * Blade cleaning brush integrated in the head protection cover
- * Head handgrip with integrated cycle button
- * Blade guide with combined action of side bearings carbide plates and top bearing
- * Direct drive Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease (Mechanical variator 20÷100 m/min for version +V)
- * Output shaft of the reduction gear box Ø 40 mm and motor wheel connection with a keyless shaft/hub connection
- * Wide table for material support material clamping vice with manual positioning and fast clamping system
- * Ergonomic working table and control panel
- * Head rotation angle stop at 0° 45° and 60°
- * Degrees measuring system graduated scale and rugged in construction locking lever
- * Millimetric reference length stop measuring system
- * Cutting length 0÷600 mm
- * Heavy duty basement
- * Sheet metal construction in different thickness chips holding sides
- * Front door with key locking
- * Hydraulic cooling pump with 20 l capacity tank for feeding both blade guides
- * Electrical cabinet with 24VAC lockable main switch and electric drives
- * Total protection against highest voltage and short circuit current Protection level IP 55
- * Line voltage 400V/50Hz/3Ph standard (230V/50Hz/1Ph230V/50Hz/3Ph110V/60Hz/1Ph 220V/60Hz/3Ph440V/60Hz/3Ph575V/60Hz/3Ph available)
- * Machine colours yellow RAL 1018 and grey RAL 7036
Specs